An Introduction To Anchor Clamps

Anchor clamp is a specialty tool that can quickly and easily tighten the screws in your anchors to prevent them from loosening and sliding. This makes it easy to install multiple anchors in one spot and make sure your bolts or screws stay in place.

How is the anchoring clamp used?

Anchoring clamps or helical dead-ends, in general, can be used on all types of poles to secure a cable at the required horizontal tensioning and height. Suspension devices, on the other hand, must be installed on intermediate poles: they keep a cable at the proper height (vertical resistance).

How to install the anchoring clamp?

Following is the procedure for mounting the anchoring clamp

Take two straps of suitable length

Pass the open end of the strap through the buckle

Locate the bracket on the pole and wrap the strap around them

Locate the other open end of the strap into the strap binding tool and lock the tool

Tension the strap by rotating the handle of the strap binding tool

Cut the additional strap using the cutting edge

Hammer to bend the flanges

The bracket now has been mounted.

Conclusion

Anchor clamps are a versatile tool that can be used for a variety of purposes. In this article, we’ve explored some of the most common uses for anchor clamps and the installation of them. Once you have read through this article, be sure to head over to Henvcon and pick up a set so that you can start using them in your next project!

About admin

Check Also

Moving Head Lights From Light Sky: The Key to a Successful Performance

The stage setup is one of the most important parts of a successful concert in …

Leave a Reply

Your email address will not be published. Required fields are marked *